| Bonded Phase | USP Listing | Particle Size (µm) | Pore Size (Å) | pH Range | Temp. Max °C (low pH) |
Temp. Max °C (high pH) |
Carbon Load (%) | Surface Area (m2/g) | Endcapped | Phase Structure | Applications | Buy |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| HILIC-A | L3 | 1.7 |
100 |
2–7 | 40 | 40 | N/A |
300 |
No | View | View | Buy Now |
| HILIC-B | L8 | 1.7 |
100 |
2–7 | 40 | 40 | 4.0 |
300 |
No | View | View | Buy Now |
| HILIC-N | L95 | 1.7 |
100 |
2–7 | 40 | 40 | 7.0 |
300 |
No | View | View | Buy Now |
Additional Details
- Columns are packed in 1000 bar UHPLC compatible hardware
- Avantor® ACE® HILIC columns provide improved retention and alternative selectivity to reversed-phase chromatography for polar and very polar analytes
- Systematic screening of these HILIC bonded phases under the same mobile phase conditions will enable you to determine the best bonded phase for your HILIC separations
- Avantor® ACE® HILIC HPLC guard columns are available for all 3.0 and 5.0 µm particle sizes across 2.1 mm – 4.6 mm ID columns – Note: C0001 male/male union is needed to connect guard holder (H0001) to column
Protect Your Column
Related Resources
Technical Notes
A Simple Step by Step Protocol for HILIC Method Development
Catalogs
Avantor® ACE® HILIC Brochure
Technical Notes
Column Equilibration in HILIC Mode
Technical Reports
HILIC Method Development Guide
Technical Notes